Rapid cool/ hot shot method

Idk if I do it correctly but I pour the boiled water form the kettle into my bottle measure it to what I need then pour it into my rapid cool leaving about 1 ounce left to mix the powder with before pouring the water from the rapid cool back into the bottle mixing it together and 9 times out of 10 it’s ready to go x

Hey! Hopefully this makes sense and is just how I do it!
My LO has 6oz so if at home I boil the kettle then as soon as it's boiled pour 4oz into rapid cool (just water) and whilst that's cooling pour the remaining 2oz into the bottle, then add the formula to the bottle, shake to mix formula then once water is green in rapid cool re-add the remaining 4oz into the bottle and shake again, it's pretty much ready to go straight away then. If out and about do exactly the same but use the water from the flask, I always boil the kettle and put water straight into flask if using and usually stays hot enough for about 4-5 hours (Nuby flask)

Hope this makes sense and helps! 😊

Heyy!!
We do the hot shot method with my 7 week old who has a 120ml feed (4ozs)

We put hot kettle water into a flask (any 1litre one, we got ours from Tesco and we change the water after 4-6hrs as the temp changes)

I pop 3ozs into the rapidcool and shake then pop upside down, then pop 1ozs into the bottle, pop in the powder and shake, then add the water from the rapid cool into the bottle.

(Ps.we use mam bottles to measure the water before putting it inside the rapidcool and the bottle lid has measurements too for the 1ozs hot shot)

Always works a charm, hope this all made sense! Xx